From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Tue Jun 06 2006 - 10:41:25 ART
Per the OSPF RFC Loopback interfaces are treated as stub hosts and
advertised as /32; this does not occur in EIGRP. If you want it
advertised as /32 just change the mask of the interface to /32.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Sami
> Sent: Tuesday, June 06, 2006 7:37 AM
> To: Cisco certification
> Subject: EIGRP /32 route
>
> Hello Group ,
>
> Is there any way EIGRP can advertise loopback as /32 network like ospf
> does.
> I tried network 150.1.5.5 0.0.0.0 but eigrp always advertise this
network
> as 150.5.5.0/24 but ospf advertise it like 150.50.5.5/32.
> no - auto summary is enabled under eigrp process.
>
> What could be the reason ?
>
> Thanks
>
>
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART