From: Darby Weaver (darbyweaver@yahoo.com)
Date: Mon Jun 05 2006 - 09:18:04 ART
Always = Always the highest and from what I've seen
this applies to both vendor and Cisco.
Now I've only not taken a lab but the tests I have
taken ALWAYS "always" means 65535.
So that IS the correct interpretation.
--- Brian Dennis <bdennis@internetworkexpert.com>
wrote:
> You have to love labs that revolve around testing
> your ability to answer
> "trick questions".
>
> HTH,
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> Mike O
> Sent: Sunday, June 04, 2006 7:10 PM
> To: ccielab@groupstudy.com
> Subject: BGP weight question
>
> I was doing a vendor lab and the question stated
> that R5 must always
> prefer
> routes from R4 and only R6 if there is a link
> failure
>
> I created a route-map and set weight on routes from
> R4 to 300. I then
> checked the answer and It was wrong saying the
> weight should have been
> 65535.
>
> My question is weight is local so no route will come
> in via R6 with a
> higher
> weight. Would a lab proctor award me points for my
> configuration?
>
> Thanks,
>
> Mike
>
>
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART