From: Daniel Fredrick (dfredrick@gmail.com)
Date: Sun Jun 04 2006 - 15:39:01 ART
That sparks a question that I have. So if they said... put the loopback 0 in
ospf area 0. Could I just put it in a different process? I mean as long as
it's reachable in the end... that's all that matters... right?
This a is a debate that some of my friends have. They say don't do anything
extra, because you'll be marked down. My arguement is, that is didn't say I
couldn't do that. Plus, it makes the lab easier when you split these things
up.
What's your opinion?
thanks,
Dan.
On 6/4/06, Brian Dennis <bdennis@internetworkexpert.com> wrote:
>
> Remember in the lab don't try and think about the "best way" to do
> something. Do whatever you need to do to meet the requirements of the
> lab and nothing more. If they want the loopback in OSPF but don't have
> any restrictions on how to get it in, then they don't care how you got
> it in. They just care that it's in OSPF.
>
> Think about it like this. If you gave someone a lab to do and told them
> to advertise a loopback into OSPF without any restrictions, how would
> you grade it? More than likely it would be something along the lines of
> "show ip route ospf | include X.X.X.X" on a neighboring OSPF enabled
> router. Compare that to hunting through the router's configuration to
> figure out how they solved the task (network statement, redistribution,
> etc).
>
> HTH,
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Sami
> Sent: Sunday, June 04, 2006 8:01 AM
> To: Cisco certification
> Subject: ospf
>
> What is the best way of advertising loopback address in ospf , via
> network
> command or redistribute connected command ?
> I always use network command but I have seen some of workbook use
> redistribut connected for loopbacks.
>
> Thanks in advance.
> Sami
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:31 ART