From: Gao, Qingli (c-qgao@state.pa.us)
Date: Wed May 31 2006 - 12:01:16 ART
The problem is we need to do source Natting on both side.
Which FWSM seems doesn't support that very well.
10.10.10.0 -------------------FWSM -------------------------192.168.1.0
We want 10.10.10.0 be NATTED to 192.168.1.1 when access other side.
And we want 192.168.1.0 be NATTED to 10.10.10.1 when access other side.
Thank you!
Qingli Gao
-----Original Message-----
From: Bajo [mailto:bajoalex@gmail.com]
Sent: Wednesday, May 31, 2006 10:10 AM
To: Gao, Qingli
Cc: ccielab@groupstudy.com
Subject: Re: NAT on FWSM
Did not have an idea what FWSM is :) So did g-search on "NAT on FWSM
site:www.cisco.com/univercd"
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm
/fwsm_2_2/fwsm_cfg/nat.htm
On 5/31/06, Gao, Qingli <c-qgao@state.pa.us> wrote:
Hi all,
We use CSM behind FWSM. FWSM Firewall Version 2.3(3)
Now we have a case here.
The server behind FWSM need access internet and need to be accessed by
internet.
The server use non-routable IP address.
Can anyone give me any suggestion on Natting on FWSM?
Thank you!
Qingli Gao
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:23 ART