From: Bajo (bajoalex@gmail.com)
Date: Fri May 26 2006 - 09:41:26 ART
timers basic update invalid holddown flush [sleeptime]
Adjust routing protocol timers.
Tha was a tough one. But IF it is the same as in ODR, "
*sleeptime*
(Optional) Interval (in milliseconds) for postponing routing updates in the
event of a flash update. The *sleeptime *value should be less than the *
update* time. If the *sleeptime* is greater than the *update* time, routing
tables will become unsynchronized.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_r/
iprprt2/1rdodr.htm#wp1018038
On 5/26/06, Bryant, Paul M <paul.m.bryant@uk.verizonbusiness.com> wrote:
>
> HI
>
> I have been looking at this command and a new timer is available...
>
> R2(config-router)#timers basic 10 60 60 80 ?
> <1-4294967295> Sleep time, in milliseconds
> <cr>
>
> It is not explained in the configuration guide. Anyone know what it does?
>
> TIA
>
> Paul Bryant
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Kind Regards,Bajo
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART