From: Godswill Oletu (oletu@inbox.lv)
Date: Fri May 26 2006 - 06:45:14 ART
Lewis,
You are correct, I forgot to add the private-as should be sub-as. I was under the impression that since sub-as/confederations normally use private-as, it will be understand.
Godswill
----- Original Message -----
From: Chris Lewis
To: Godswill Oletu
Cc: xprtofnet ; Shamin ; Cisco certification
Sent: Thursday, May 25, 2006 9:10 PM
Subject: Re: BGP issue
Godswill,
Do you have a link that would support that conclusion? I have always taken local-as to restrict advertisement to within a single confederation sub-AS. No export would still let the route be sent to all sub-ASes in the confederation, but not to any eBGP peers outside the confederation.
Granted confederations are often implemented using private AS numbers, but I'm not aware of anything that ties the use of local-as to a private AS number per se.
Chris
On 5/25/06, Godswill Oletu <oletu@inbox.lv> wrote:
The 'local-as' community attribute, only work within a privateas, ie the
peer, you are sending that community attribute must be peering with you
using a private-as numbers <AS 64512 - 65535>.
For public-as numbers <AS 1 - 654511>, the bgp community attribute
'no-export' when used, will achieve the same purpose. They are both the
same, the only difference, is that one should be used for private-as and the
other for public-as.
HTH
Godswill Oletu
----- Original Message -----
From: "xprtofnet" <xprtofnet@yahoo.com>
To: "Shamin" < ccie.xpert@gmail.com>; "Cisco certification"
<ccielab@groupstudy.com>
Sent: Wednesday, May 24, 2006 12:36 PM
Subject: Re: BGP issue
> by setting the community to "local-as" you are telling
> the router not to advertise this prefix out side your
> own local as.
>
> m2c
>
> --- Shamin <ccie.xpert@gmail.com> wrote:
>
> > Hi all,
> >
> > I am stuck in a problem from the IEWB VER3 LAB-8
> > Task 4.5. The scenario is
> > as follows :
> >
> >
> > BB3 (AS 54)
> > |
> > (EBGP) Eth0/0
> > {174.1.1.1/24}
> > |
> > |
> > R5(AS 65145) ----------- R1(AS
> > 65145 )
> > -----------(EBGP)----------- R3(AS 65038)
> > -----------(EBGP)---- R2(AS 65267)
> > |
> > |
> > |
> > |
> > |____R4(AS 65145)__|
> >
> >
> >
> > The question states as follows :
> > 1) Advertise 174.1.1.0/24 network into the bgp
> > domain on R1
> > 2) Devices outside of AS 65145 should not have
> > reachability to this
> > network
> > 3) Do not use any access-list or prefix lists
> > to accomplish this.
> >
> > The solution provided is as follows on R1 -
> >
> > R1#
> > router bgp 65145
> > network 174.1.1.0 mask 255.255.255.0
> > route-map LOCAL_AS
> > neighbor 150.1.5.5 send-community
> > !
> > route-map LOCAL_AS permit 10
> > set community local-As
> >
> >
> > Can anyone help me understand the two statements
> > under the router bgp ,
> > especially the network statement. And what does this
> > Local-As
> > community actually do. When i configured this in my
> > lab, I was not able to
> > see the 174.1.1.0/24 network on R3 as required. Why
> > didnt R1 sent the
> > update to R3 because as per above configurations , I
> > dont see any reason for
> > R1 not adverstising 174.1.1.0/24 to R3.
> >
> > Please help me understand the scenario.
> >
> > Regards
> > Shamin
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART