From: Vishal Patel (vpatel@accessproviders.com.au)
Date: Thu May 25 2006 - 20:09:14 ART
Hi,
Iam filtering routes in OSPF , iam only taking a default.
But in BGP iam accepting all the networks.
But my routing table keeps on changing , it installs all the routes via IBGP
and then in next movement it shows only default learned from OSPF.
Is this an IOS bug or Iam making any mistake ?
Cheers
Vishal
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of KC
Sent: Thursday, 25 May 2006 5:15 PM
To: Vishal Patel
Cc: ccielab@groupstudy.com
Subject: Re: Routing issue
the reason is here that u r publishing same routes to OSPF we well as BGP.
That is not correct, U are also in process of publishing Serial interface
routes to both as well.
On 5/24/06, Vishal Patel <vpatel@accessproviders.com.au> wrote:
>
> Hi all,
>
> Iam facing a weird problem.
>
> I have a router running ospf and ibgp.
>
> And i have a distribute-list which allows only a default route from
> the neigbour in ospf domain.
>
> And Iam accepting all the internal routes via IBGP.
>
> My routing table should show the internal routes via IBGP with the
> metric of 200.
>
> But the problem happening is the routing updates are continously
> changing between ospf and bgp.
>
> for a movement I get only default route via ospf and next movement I
> get all the internal routes via IBGP.
>
> As soon as remove distribute-list from ospf and accept the whole
> network via ospf , the things are stable.
>
> Well i also have more ospf neigbour , to a different router but it
> has higher cost and it never appears in the routing table.
>
> Any ideas ?
>
> Cheers
>
> Vishal
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART