From: Carlos Campos Torres \(ccampost\) (ccampost@cisco.com)
Date: Thu May 25 2006 - 15:58:42 ART
One thing to consider here that happened to me using tclsh (thanks Brian
McGahan for explaining this to me), when you use tclsh make sure you
exit it, either by exiting the console and coming back or typing exit,
this is because if you do not do that, whenever you try to use the set
keyword in a route-map it won't take the command, this is because tclsh
will treat this command as trying to set a variable and the IOS won't
take it as the set keyword for its real purpose.
Just a little caveat I thought would be worth mentioning =)
Regards,
Carlos Campos
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Nick Griffin
Sent: Wednesday, May 24, 2006 10:53 PM
To: Nick Griffin
Cc: rocco ******; ccielab@groupstudy.com
Subject: Re: Testing IP connectivity
Ping local interfaces on FR depends on the specific requirements.
>
> For the 3550 tcl, you have initiate the ping via tcl from another
> router. So it would look like this:
>
> R1:
> foreach address {
> 1.1.1.1
> 2.2.2.2
> 3.3.3.3
> 4.4.4.4
> } {
> puts [rsh 10.10.10.10 ping $address]
> }
>
> where 10.10.10.10 is for example an address on the 3550. Note you have
> to have rcmd enabled on the switch, and the remote rsh router added:
>
> cat1#sh run | i rcmd
> ip rcmd rsh-enable
> ip rcmd remote-host R1 1.1.1.1 R1 enable
>
> HTH
>
>
> rocco ****** wrote:
>> Thanks for the input, All.
>> I was wondering if the lab requires you to be able to ping the local
>> frame-relay interface? Also, is there something similar I could run
>> on a 3550 for testing connectivity?
>>
>>
>> --------------------------------------------------------------------
>>
>> From: darbyweaver@yahoo.com
>> Reply-To: darbyweaver@yahoo.com
>> To: ccielab@groupstudy.com
>> Subject: Re: Testing IP connectivity
>> Date: Tue, 23 May 2006 21:04:30 -0400
>> MIME-Version: 1.0
>> Received: from lists.groupstudy.com ([207.44.210.9]) by
>> bay0-mc9-f11.bay0.hotmail.com with Microsoft
SMTPSVC(6.0.3790.1830);
>> Tue, 23 May 2006 18:05:04 -0700
>> Received: (from sympa@localhost)by lists.groupstudy.com
>> (8.12.11.20060308/8.11.6) id k4O14fMN002109;Tue, 23 May 2006
21:04:41
>> -0400
>> Received: from groupstudy.com (www.groupstudy.com
[209.51.144.7])by
>> lists.groupstudy.com (8.12.11.20060308/8.11.6) with ESMTP id
>> k4O14VSP002073for <ccielab@lists.groupstudy.com>; Tue, 23 May 2006
>> 21:04:31 -0400
>> Received: from groupstudy.com (groupstudy.com [127.0.0.1])by
>> groupstudy.com (8.12.11.20060308/8.12.10) with ESMTP id
>> k4O14aUw027204GroupStudy Mailer; Tue, 23 May 2006 21:04:36 -0400
>> Received: (from listserver@localhost)by groupstudy.com
>> (8.12.11.20060308/8.12.11/Submit) id k4O14a7x027202for
>> ccielabxhiddenx; Tue, 23 May 2006 21:04:36 -0400
>> Received: from lists.groupstudy.com (lists.groupstudy.com
>> [207.44.210.9]) by groupstudy.com (8.12.11.20060308/8.12.10) with
>> ESMTP id k4O14ZNS027181 GroupStudy Mailer; Tue, 23 May 2006
21:04:35
>> -0400
>> Received: (from sympa@localhost) by lists.groupstudy.com
>> (8.12.11.20060308/8.11.6) id k4O14UDO002069 for
>> ccielab@groupstudy.com; Tue, 23 May 2006 21:04:30 -0400
>> >I sent you a Step by step guide.
>> >
>> >CYM
>> >
>>
>> >____________________________________________________________________
>> >___
>> >Subscription information may be found at:
>> >http://www.groupstudy.com/list/CCIELab.html
>>
>> _____________________________________________________________________
>> __ Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART