From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Wed May 24 2006 - 11:35:38 ART
Thanks for the update, Sidalo. This helps a lot. Actually, there was
not a specific lab....just looking at things from different angles. I
seems to get into the real lab and say, "Hmmmm, I never ran into that
one before". Not a good feeling. So, I am just trying to cover all the
bases. Thanks!
Dave Schulz,
Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com%20>
________________________________
From: Sidalo [mailto:sidalo@gmail.com]
Sent: Wednesday, May 24, 2006 10:09 AM
To: Schulz, Dave
Cc: lim es; ccielab@groupstudy.com
Subject: Re: tough redistribution ques
Not sure if you have access to Internetwork Expert WB v3, but if so
check the redistribution on Volume 1 Lab 6.
In short, the redistribution is not transitive on the same router. If A
goes into B and B goes into C, A does not automatically go into C, but
must be manually sent into C as well.
Is this a lab scenario somewhere? Does it actually have the restriction
of not redistributing that connected route into RIP?
On 5/24/06, Schulz, Dave <DSchulz@dpsciences.com> wrote:
Lim -
You probably want to remove the redistribute ospf under the ospf
process. You should also add a statement " route-map map1 permit 20 "
on R2. When you redistribute a protocol into another, it assumes
redistribute connected. However, you are breaking the redistribution
with the redistribution of the already connected interfaces and only
redistributing the loopback 0 interface. Please let me know if I missed
something.
Dave Schulz,
Email: dschulz@dpsciences.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
lim es
Sent: Wednesday, May 24, 2006 9:26 AM
To: ccielab@groupstudy.com
Subject: tough redistribution ques
Hi Group,
[r1]---------[r2]---------[r3]
r1 and r2 run rip, network: 12.0.0.0/24
r2 and r3 run ospf, network: 23.0.0.0/24
===router configs ===
r1:
router rip
no auto
ver 2
network 12.0.0.0
r2:
int lo0
ip add 2.2.2.2 255.255.255.0
ip ospf network point-to-point
router rip
no auto
ver 2
network 12.0.0.0
redistribute ospf 1 subnets
default-metric 2
!
router ospf 1
network 23.0.0.2 0.0.0.0 area 0
redistribute connected route-map map1
redistribute ospf match internal ext 1 ext 2
default-metric 10000
!
route-map map1 permit 10
match int loopback0
!
r3:
!
router ospf 1
network 23.0.0.3 0.0.0.0 area 0
==========
Ques: How to get r1 to recieve that route for
loopback0 without:
1) doing redistribute connected on rip
2) with static route
3) typical restrictions we have on the lab
I am just puzzled with this
TIA
Lim
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART