From: Jai Prakash (jpjsr06@gmail.com)
Date: Sun May 21 2006 - 10:46:32 ART
Hi,
You can use "distribute-list" command under OSPF router process to
advertise LAN subnets into ospf area. This method is conditional
advertisment of Networks using access-lists.
If anyone has better method than this , just share with us.
Best Regards,
Jai
On 5/21/06, Radioactive Frog <pbhatkoti@gmail.com> wrote:
>
> Hi,
>
>
>
>
192.168.1.x----LAN-----R1---10.2-------------10.1---R2-----LAN----192.168.3.0
> \ /
>
> \ /
> \-------------R3-------------/
> |
> |LAN
> 192.168.2.0
>
> What is the best way not to advertise the LAN interfacfe in the OSPF
> process? You should be able to enable OSPF on all Serial but not on LAN
> interface of all routers without using the access-list.
>
>
> Regards,
> Frog
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:22 ART