Clasification in MQC over Frame-relay

From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Thu May 18 2006 - 21:13:54 ART

• Next message: Radioactive Frog: "Re: Subneting - Basic Question but doubt full"
• Previous message: Roberto Fernandez: "More on OSPF route selection"
• Next in thread: Godswill Oletu: "Re: Clasification in MQC over Frame-relay"
• Maybe reply: Godswill Oletu: "Re: Clasification in MQC over Frame-relay"
• Maybe reply: Victor Cappuccio: "RE: Clasification in MQC over Frame-relay"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello Guys

Why I can not do classification in Frame-relay Traffic Shaping using MQC?

Rack1R3(config)#class-map C::SQLWORM

Rack1R3(config-cmap)#ma protocol sqlserver

Rack1R3(config-cmap)#policy-map pSQLWORM

Rack1R3(config-pmap)#class SQLWORM:TASKQOS

Rack1R3(config-pmap-c)#shape average 256000

Rack1R3(config-pmap-c)#shape max-buffers 2048

Rack1R3(config-pmap-c)#map-class frame-relay TS

Rack1R3(config-map-class)#service-policy output P::SQLWORM

Only class-default supported over FR VCs

Rack1R3(config-if)#service-policy output pSQLWORM

 Shaping is not allowed simultaneously at the physical interface and
subinterfaces or at interface/subinterface and PVCs

Thanks
Victor.

• Next message: Radioactive Frog: "Re: Subneting - Basic Question but doubt full"
• Previous message: Roberto Fernandez: "More on OSPF route selection"
• Next in thread: Godswill Oletu: "Re: Clasification in MQC over Frame-relay"
• Maybe reply: Godswill Oletu: "Re: Clasification in MQC over Frame-relay"
• Maybe reply: Victor Cappuccio: "RE: Clasification in MQC over Frame-relay"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART