From: Vikram Dadlaney (vdadlaney@gmail.com)
Date: Mon May 15 2006 - 19:39:04 ART
Hi Deep,
I believe this would give you a recursion error possibly indicating a
routing loop. Arp would work however any packets destined to the ip address
would fail. Please do advise if this is what you see. Thx
On 5/15/06, Mark Lasarko <mlasarko@co.ba.md.us> wrote:
>
> ? Have you actually tried this...
> AFAIK the router should bark at you :(
> "%Invalid next hop address" or similar message.
> ~M
>
>
> >>> "D R" <deep.ratan@gmail.com> 05/15/06 8:38 AM >>>
>
> Gents, Rudimentary question:
>
> FA0/1 is configured with 10.10.10.1 255.255.255.0 and is up/up.
>
> in global config mode:
>
> ip route 10.10.10.10 255.255.255.255 10.10.10.10
>
> The static route config above will:
>
> A) cause a routing loop
> B) have no effect
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART