From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri May 12 2006 - 03:05:11 ART
<CCO>
show adjacency
To display Cisco Express Forwarding (CEF) adjacency table information,
use the show adjacency command in user EXEC or privileged EXEC mode.
show adjacency [type number] [detail] [summary]
</CCO>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/
swtch_r/swi_n1.htm#wp1082242
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jai Prakash
Sent: Thursday, May 11, 2006 10:59 PM
To: R&S CCIE GroupStudy
Subject: Hi Group
I have one question ......there is one command in privilage mode called
"show adjacency". When we execute it at privilage mode, it gives a table
of
Protocol, Interface and IP.
Rack1R3#sh adjacency
Protocol Interface Address
IP Serial0/2/0 point2point(7) ---------------- What
does this value means, which is in brakets?
IPV6 Serial0/3/0 point2point(3)
IP Serial0/3/0 point2point(29)
IP FastEthernet0/0 192.10.1.254(11)
IP FastEthernet0/1 204.12.1.254(13)
IP Serial0/0/0 191.1.34.4(11)
IP Serial0/0/0 191.1.34.3(3)
IP FastEthernet0/1 204.12.1.6(27) ------------ What
does
this value means, which is in brakets?
Rack1R3#
Any help will be appricable.
Thks & Rgds,
Jai
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART