From: Vishal Patel (vpatel@accessproviders.com.au)
Date: Fri May 12 2006 - 01:59:16 ART
Hi,
After reading this post , I remember I tried this command in one of my
previous jobs..
Enable engineer
In my present job , when I type this command it is asking for a password.
I have tried the regular password which are suppose to me CAT switches
password..
But it does work..
Does anyone knows what is the default password to login to engineer mode ?
Cheers
Vishal
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Brian Dennis
Sent: Friday, 12 May 2006 2:32 PM
To: chris Iannacone; ccielab@groupstudy.com
Subject: RE: engineering mode
Search the archives for this topic. It was discussed heavily when the
Cat5ks were used in the CCIE lab. As far as why it's not documented, well
it's an "engineer mode" and not a "customer mode" ;-)
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
chris Iannacone
Sent: Thursday, May 11, 2006 8:53 PM
To: ccielab@groupstudy.com
Subject: engineering mode
I read on the hienzulm website about an engineering mode in the cat5000
switches , does the cat 550 have a similar mode? what does it do ? why has
cisco chosen not to document this mode and to hide it so well
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART