From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri May 12 2006 - 01:54:52 ART
Just type out "clear ip mroute *" and hit enter.
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
san
Sent: Thursday, May 11, 2006 7:22 PM
To: R&S CCIE GroupStudy
Subject: clear ip mroute command question
Hi,
I am running 12.4-5a.bin Image & i am not able to find the VRF word to
do "
clear ip mroute vrf * ". Does anyone know how to overcome this issue.
Thanks in Advance.
Rack1R5#
Rack1R5#clear ip mroute ?
vrf Select VPN Routing/Forwarding instance
Rack1R5#clear ip mroute vrf ?
WORD VPN Routing/Forwarding instance name
Rack1R5#clear ip mroute vrf zero ?
* Delete all multicast routes
Hostname or A.B.C.D IP name or group address
Rack1R5#clear ip mroute vrf zero *
% VPN Routing instance zero does not exist. Create first.
Rack1R5#
Rack1R5#
Rack1R5#sh ip mroute
IP Multicast Routing Table
Flags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C -
Connected,
L - Local, P - Pruned, R - RP-bit set, F - Register flag,
T - SPT-bit set, J - Join SPT, M - MSDP created entry,
X - Proxy Join Timer Running, A - Candidate for MSDP
Advertisement,
U - URD, I - Received Source Specific Host Report,
Z - Multicast Tunnel, z - MDT-data group sender,
Y - Joined MDT-data group, y - Sending to MDT-data group
Outgoing interface flags: H - Hardware switched, A - Assert winner
Timers: Uptime/Expires
Interface state: Interface, Next-Hop or VCD, State/Mode
(*, 224.0.1.39), 19:34:48/stopped, RP 0.0.0.0, flags: DC
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
FastEthernet0/0, Forward/Sparse, 00:04:52/00:00:00
Serial0/0, Forward/Sparse, 19:34:48/00:00:00
FastEthernet0/1, Forward/Sparse, 19:34:48/00:00:00
(150.1.2.2, 224.0.1.39), 00:00:47/00:02:12, flags:
Incoming interface: Null, RPF nbr 141.1.25.2
Outgoing interface list:
FastEthernet0/1, Forward/Sparse, 00:00:47/00:00:00
Serial0/0, Forward/Sparse, 00:00:48/00:00:00
FastEthernet0/0, Forward/Sparse, 00:00:48/00:00:00
(150.1.5.5, 224.0.1.39), 19:34:15/00:02:44, flags: T
Incoming interface: Loopback0, RPF nbr 0.0.0.0
Outgoing interface list:
FastEthernet0/0, Prune/Sparse, 00:00:15/00:02:44
FastEthernet0/1, Forward/Sparse, 19:33:13/00:00:00
Serial0/0, Prune/Sparse, 00:00:11/00:02:48, A
(*, 224.0.1.40), 19:37:20/stopped, RP 0.0.0.0, flags: DCL
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
FastEthernet0/0, Forward/Sparse, 00:04:53/00:00:00
Serial0/0, Forward/Sparse, 19:37:20/00:00:00
FastEthernet0/1, Forward/Sparse, 19:37:20/00:00:00
(150.1.8.8, 224.0.1.40), 19:32:50/00:02:06, flags: LT
Incoming interface: FastEthernet0/1, RPF nbr 141.1.0.8
Outgoing interface list:
FastEthernet0/0, Forward/Sparse, 00:04:53/00:00:00
Serial0/0, Forward/Sparse, 00:00:51/00:00:00, A
-- Thanks & Rgds SAN
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART