From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri May 12 2006 - 01:28:29 ART
The integrated interfaces on the 2800's and 3800's do not support ISL.
I didn't find it documented on CCO for the 2800's but it is documented
for the 3800's. The best documentation for the 2800's is the IOS itself
;-)
Router(config-if)#int g0/0.1
Router(config-subif)#encapsulation ?
dot1Q IEEE 802.1Q Virtual LAN
Router(config-subif)#
Router(config-subif)#do sho ver | in IOS
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version
12.4(5a), RELEASE SOFTWARE (fc3)
Router(config-subif)#
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Yoshe Rionando
Sent: Thursday, May 11, 2006 7:40 PM
To: ccielab@groupstudy.com
Subject: OT : ISL trunk on 2811
Hi there,
I have a problem with 2811 router.
When i configure fastethernet interface with ISL trunk subinterface, it
look like do not support.
This router using ios 12.4 advanseIpService.
R2811(config-subif)#encapsulation ?
dot1Q IEEE 802.1Q Virtual LAN
R2811(config-subif)#encapsulation
Does anyone meet the same problem ang solve it ?
Yoshe Rionando Y.
PT. Swadharma Duta Data
Network System Dept.
Network System Engineer
phone : 62 21 8318881
fax : 62 21 8297293
mobile : 62 8159084895
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART