From: Plank, Jason (JPlank@concordefs.com)
Date: Thu May 11 2006 - 11:23:44 ART
Yes it does.
Genpass(config-router)#neighbor 1.1.1.1
% Incomplete command.
Genpass(config-router)#neighbor 1.1.1.1 fa0/0 ?
<cr>
Genpass(config-router)#neighbor 1.1.1.1 fa0/0
-------------------
Jason Plank
Network Engineer
101 Bellevue Parkway
Wilmington, DE 19809
E-mail: JPlank@concordefs.com
Phone: 302-793-5913
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of JB
Sent: Thursday, May 11, 2006 10:18 AM
To: Schulz, Dave
Cc: ccielab@groupstudy.com
Subject: Re: EIGRP - Advertising from specific interface
The neighbor command will unicast advertise to a particular neighbor,
but I don't think it will tell the router what interface to advertise
the update out of.
JB
On 5/11/06, Schulz, Dave <DSchulz@dpsciences.com> wrote:
> JB - Take a look at the neighbor command. This may help you.
>
> Dave Schulz
> Email: dschulz@dpsciences.com
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> JB
> Sent: Thursday, May 11, 2006 2:22 AM
> To: ccielab@groupstudy.com
> Subject: EIGRP - Advertising from specific interface
>
> The lab I am redoing asks for EIGRP updates to be restricted to a
> particular interface without using the passive-interface command. The
> interface address is, for example, 1.1.1.1/24. The WB solution is
> using #network 1.1.1.1 0.0.0.0
> I am just wondering if the line #network 1.1.1.0 0.0.0.255 would also
> be acceptible if none of the other interface on that particular router
> falls within that 1.1.1.0/24 range? I know the #network 1.1.1.0
> 0.0.0.255 is not the best solution, but I believe it still does
> fulfill the requirements..... Any thoughts???
>
> Cheers,
>
> JB
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART