From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Thu May 11 2006 - 10:44:31 ART
Sami -
Take a look at the docCD on what split-horizon does, by disallowing
advertising what it receives on an interface to be sent out the same
interface. So if you are on hub and spoke, for example, and need to get
the inform from a spoke to another spoke (received at the hub, set up as
multipoint)....you will need to disable it. HTH.
Dave Schulz,
Email: dschulz@dpsciences.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Sami Salim
Sent: Thursday, May 11, 2006 6:56 AM
To: CCIE Group Syudy
Subject: Split-horizon enable/disable
Hi folks,
I am trying to understand the logic to enable/disable split-horizon on
distance-vector interfaces; like ethernet sub-interface, physical serial
f/r, sub-interface serial f/r and lastly the hub&spoke physical and
sub-interface.
Thank you
---------------------------------
Now you can have a huge leap forward in email: get the new Yahoo! Mail.
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART