From: Lanny Ballard (lanny26ga@hotmail.com)
Date: Wed May 10 2006 - 17:37:24 ART
It is Unity version 4.0.4 on a W2K running Exchange 2000
I have followed the instructions from the beginning. I first ran the cuspa,
which checked to make sure I had all the service packs. I then created the
proper installation accounts and ran the permissions wizard. I then ran the
cuica, which supposedly installed unity correctly, but I get the error message
at the end of the installation. As far as volumes set up. I only have one
drive, but I will go back through and see if partitioning it into logical
partitions will help.
Thanks!
> Date: Wed, 10 May 2006 16:22:12 -0400> From: michael625@cox.net> To:
ccielab@groupstudy.com; lanny26ga@hotmail.com> Subject: Re: Unity installation
woes> > What version of Unity?> > Have you run the configuration disk or have
the volumes setup correctly as documented?> > -MP> ---- Lanny Ballard
<lanny26ga@hotmail.com> wrote: > > Guys,> > I am trying to install Unity for a
home lab, and during the Unity> > installation, I keep getting a vbsript error
saying that the file cfgcuapp> > gets a path not found error. The exact error
code is 800a004c.> > Of course this seems insignificant, but then when I try
to integrate with> > Exchange, I get even more errors, and it bugs out.> > Any
ideas on what I'm doing wrong? I have followed the installation> >
instructions to the T, as this is about the 10th time I have started from> >
scratch with an OS reload.> > If you have suggestionsor questions, please let
me know.> > Thanks!> >
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART