From: Kemal YILDIRIM (kemalhy@gmail.com)
Date: Tue May 09 2006 - 10:17:29 ART
If you change config-register at bootrom, Config-register setting and
startup config can be different.
FRSWICTH#sh startup-config | begin line con 0
line con 0
speed 19200
FRSWICTH#sh ver | begin Config
Configuration register is 0x2102
-----Original Message-----
From: Popgeorgiev Nikolay [mailto:nikolay.popgeorgiev@siemens.com]
Sent: Tuesday, May 09, 2006 3:52 PM
To: Kemal YILDIRIM; 'HUZEFA RATLAMWALA'; ccielab@groupstudy.com
Subject: RE: Problem with Console
If it was to the console speed he shouldn't be able to see any output on the
screen
Try to skip the startup configuration to see if there is any problem with
it.
Best,
Nick
-----Original Message-----
From: Kemal YILDIRIM [mailto:kemalhy@gmail.com]
Sent: Tuesday, May 09, 2006 3:35 PM
To: 'HUZEFA RATLAMWALA'; ccielab@groupstudy.com
Subject: RE: Problem with Console
Hi Huzefa,
Did you changed your console speed for any IOS update.
Change your console speed just to check with 115000bps and other speeds
accordinly.
Regards,
Kemal
Objects are what is unalterable and subsistent;
their configuration is what is changing and unstable.
So, you need PRACTICE, PRACTICE, AND MORE PRACTICE...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
HUZEFA RATLAMWALA
Sent: Tuesday, May 09, 2006 3:13 PM
To: ccielab@groupstudy.com
Subject: Problem with Console
Hi Group,
I have a problem with 1711 router, I configured the router to support VPN to
a remote site. When I removed the router from the Rack and reloaded (with
the power on/off button) the router gets stuck in after the message
" Press Return to get started" and I pressed the Return key atleast 100
times but no response.
However when I connect through a cable, I can ping and telnet the box.
I need help on this.
Huzefa
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART