RE: OSPF Hello Interval

From: Plank, Jason (JPlank@concordefs.com)
Date: Mon May 08 2006 - 13:58:52 ART


Yes, make sure you chose a network type with compatible DR arrangements.
I've made this work on several occasions (only for lab purposes). The
easiest thing to do is obviously changing the network types.

-------------------
Jason Plank
Network Engineer
101 Bellevue Parkway
Wilmington, DE 19809
E-mail: JPlank@concordefs.com
Phone: 302-793-5913

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Nick
Griffin
Sent: Monday, May 08, 2006 11:09 AM
To: Brent Foster
Cc: ccielab@groupstudy.com
Subject: Re: OSPF Hello Interval

Changing the ospf network type will change the timers. Keep in mind the
modes will need to be compatible. Brian M from IE just posted an email a
week or two ago regarding compatible ospf network types. The only ways I
know of are the "ip ospf hello-interval" and changing the network type.

Brent Foster wrote:
> I have a lab that I'm working that states the
> following requirement:
>
> "FR-1 should be configured on main interface of r3 and
> r4, also it should have a hello time of 10 seconds.
> Do not use ip ospf hello time to modify this."
>
> First, is there a command "ip ospf hello time"? I
> only am familiar with "ip ospf hello-interval". Maybe
> we can assume this is what they mean.
>
> So, is there any other way to modify the hello
> interval? This is a non-broadcast frame-relay link,
> so the default interval will be 30 sec. There is the
> "poll-interval" as part of the neighbor command, but
> this isn't the same thing is it?
>
> --Brent
>
> Brent Foster
> jbrentfoster@yahoo.com
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART