From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Sat May 06 2006 - 11:35:03 ART
R1 used to have regular Ethernet. This must be a discrepancy between
versions when the platform changed.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> forwardtruth@yahoo.com
> Sent: Saturday, May 06, 2006 2:52 AM
> To: ccielab@groupstudy.com
> Subject: Configured bandwidth on a fastethernet interface
>
> IEWB-RS Lab6 V3 Task 8.1 Breakdown
>
> ((Interface_bandwidth = configured_bandwidth *
max-reserved-bandwidth/100
> Configured_bandwidth = interface_bandwidth *
100/max-reserved-bandwidth)).
>
> I think he considered the bandwidth for Ethernet 10 Mbps , which is
equal
> to 10000 kbps,,,interface bandwidth,,,Am I right ?
>
> max-reserved-bandwidth by default is 75% or 75/100
>
> Configured bandwidth= 10000 * 100/75 = 13333 kbps.
>
> If we look at the configuration below we find that number 133334 is
used
> with keyword bandwidth
>
> Should not be 13333 instead of 133334 ?
>
>
>
>
> interface FastEthernet0/0
> bandwidth 133334
> service-policy output QOS
> R1#sh queue fa0/0 | in Available
> Available Bandwidth 100000 kilobits/sec
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:20 ART