From: Chris Lewis (chrlewiscsco@gmail.com)
Date: Fri May 05 2006 - 15:47:51 ART
Mike,
I don't see anything in the question that means you need to change the Tc
from the default selection, which in this case would be 125msec, but in
higher CIR cases would be less than 125msec, setup a CIR of 2 Meg and look
at the deafult Tc, it will not be 125 msec.
If you do not want a DLCI to burst above 128000, set teh CIR to 128000 and
the Be to zero.
Chris
On 5/5/06, Mike O <mikeeo@msn.com> wrote:
>
> The question asks that DLCI 100 conform to the ISP's CIR of 128000 with a
> port speed of 512k and the rest of the DLCI's get the remaining bandwidth.
> DLCI 100 should not burst above 128k.
>
> I'm supposed to use the lowest Tc avaiable for DLCI 100 and the rest
> should
> use the default Tc.
>
>
> I've never really understood the Tc.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:20 ART