Re: show ip pim rp map

From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Mon May 01 2006 - 00:11:18 ART


 Hello Brian,

I am trying to match
225.10.0.0 - 225.10.255.255
225.26.0.0 - 255.26.255.255
225.42.0.0 - 255.42.255.255
225.58.0.0 - 255.58.255.255

But when I join a Multicast Group on Sw1 (like

Rack1Sw1#show ip igmp gr
IGMP Connected Group Membership
Group Address Interface Uptime Expires Last
Reporter
225.11.11.11 FastEthernet0/4 00:14:35 00:02:24 164.1.47.7
224.0.1.40 FastEthernet0/4 04:06:30 00:02:22 164.1.47.7

and on R2 I do ping to that group ..

Rack1R2#ping 225.11.11.11

Type escape sequence to abort.
Sending 1, 100-byte ICMP Echos to 225.11.11.11, timeout is 2 seconds:

Reply to request 0 from 164.1.47.7, 225 ms
Rack1R2#

But in R3 is marked at the mcast table as Sparse.. That group should be
Dense right??

Brian Dennis wrote:

  What groups are you trying to match that the ACL?
  
  Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security) bdennis@internetworkexpert.com
   
  Internetwork Expert, Inc. http://www.InternetworkExpert.com
  Toll Free: 877-224-8987
  Direct: 775-745-6404 (Outside the US and Canada)

  -----Original Message-----
  From: nobody@groupstudy.com [ mailto:nobody@groupstudy.com ] On Behalf Of
  Victor Cappuccio
  Sent: Sunday, April 30, 2006 7:47 PM
  To: Victor Cappuccio
  Cc: CCIE LAB
  Subject: Re: show ip pim rp map
  
  upppss I forgot to add the RP Configuration

  Rack1R3#show run | in send
  ip pim send-rp-announce Loopback0 scope 16 group-list 10
  ip pim send-rp-discovery Loopback0 scope 16
  Rack1R3#show access-list 10
  Standard IP access list 10
      10 permit 225.10.0.0, wildcard bits 0.48.255.255
  
  Thanks
  
  Victor Cappuccio wrote:

    Hello Guys,
    
    Rack1R2#show ip pim rp mapp
    PIM Group-to-RP Mappings
                                                                   
    Group(s) 225.8.0.0/14
      RP 10.3.3.3 (?), v2v1
        Info source: 10.3.3.3 (?), elected via Auto-RP
             Uptime: 00:26:00, expires: 00:02:44
    
    Group(s) 226.36.0.0/14
      RP 10.4.4.4 (?), v2v1
        Info source: 10.3.3.3 (?), elected via Auto-RP
             Uptime: 00:33:02, expires: 00:02:44
    
    Who do you know to witch group R3 is elected to be the RP?
    
    I am trying to understand the 225.8.0.0/14 range here

  _______________________________________________________________________

    Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html

  _______________________________________________________________________
  Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:20 ART