From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Mon May 01 2006 - 00:00:31 ART
What groups are you trying to match that the ACL?
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Victor Cappuccio
Sent: Sunday, April 30, 2006 7:47 PM
To: Victor Cappuccio
Cc: CCIE LAB
Subject: Re: show ip pim rp map
upppss I forgot to add the RP Configuration
Rack1R3#show run | in send
ip pim send-rp-announce Loopback0 scope 16 group-list 10
ip pim send-rp-discovery Loopback0 scope 16
Rack1R3#show access-list 10
Standard IP access list 10
10 permit 225.10.0.0, wildcard bits 0.48.255.255
Thanks
Victor Cappuccio wrote:
> Hello Guys,
>
> Rack1R2#show ip pim rp mapp
> PIM Group-to-RP Mappings
>
> Group(s) 225.8.0.0/14
> RP 10.3.3.3 (?), v2v1
> Info source: 10.3.3.3 (?), elected via Auto-RP
> Uptime: 00:26:00, expires: 00:02:44
>
> Group(s) 226.36.0.0/14
> RP 10.4.4.4 (?), v2v1
> Info source: 10.3.3.3 (?), elected via Auto-RP
> Uptime: 00:33:02, expires: 00:02:44
>
> Who do you know to witch group R3 is elected to be the RP?
>
> I am trying to understand the 225.8.0.0/14 range here
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:20 ART