From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Sun Apr 30 2006 - 23:47:08 GMT-3
upppss I forgot to add the RP Configuration
Rack1R3#show run | in send
ip pim send-rp-announce Loopback0 scope 16 group-list 10
ip pim send-rp-discovery Loopback0 scope 16
Rack1R3#show access-list 10
Standard IP access list 10
10 permit 225.10.0.0, wildcard bits 0.48.255.255
Thanks
Victor Cappuccio wrote:
> Hello Guys,
>
> Rack1R2#show ip pim rp mapp
> PIM Group-to-RP Mappings
>
> Group(s) 225.8.0.0/14
> RP 10.3.3.3 (?), v2v1
> Info source: 10.3.3.3 (?), elected via Auto-RP
> Uptime: 00:26:00, expires: 00:02:44
>
> Group(s) 226.36.0.0/14
> RP 10.4.4.4 (?), v2v1
> Info source: 10.3.3.3 (?), elected via Auto-RP
> Uptime: 00:33:02, expires: 00:02:44
>
> Who do you know to witch group R3 is elected to be the RP?
>
> I am trying to understand the 225.8.0.0/14 range here
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:42:00 GMT-3