From: Nick Griffin (ngriffin@sio.midco.net)
Date: Sun Apr 30 2006 - 22:43:00 GMT-3
Also, don't forget vtp pruining doesn't work on the links to routers,
those you must use the "switchport trunk allowed vlan" to add/remove
what the scenario calls for.
darby.weaver@universalorlando.com wrote:
> Hi Mike,
>
> Careful here:
>
> VTP Pruning is not an option while in transparent mode and perhaps some of the other sections can help you spell out whether or not you require transparent ot Client/Server mode etc.
>
> So be careful for that little pitfall.
>
> Another thing, if the question asks you "explicity allow or deny" then I'd be be prepared to use the appropriate "COMMAND" to do exactly that and no more / no less.
>
> Remember, there are lots of ways to do things... In the lab thay typically want one and only one way (unless you have found something new and may require a regrade for your cleverness).
>
> Others may disagree with my words and reasoning... So goes life.
>
> But if there are two or three ways to do a task as mentioned above and the words "allow" or "deny" or "prune" were explicity there - or if other wording were present to point to one of the VTP modes unique features, then I'd read a little close to the requirements.
>
> Good Luck!
>
> Darby
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:42:00 GMT-3