From: Faryar Zabihi \(fzabihi\) (fzabihi@cisco.com)
Date: Sat Apr 29 2006 - 14:28:45 GMT-3
IP-EIGRP(Default-IP-Routing-Table:10): Neighbor 54.1.x.254 not on common
subnet for Serial0/0/0 ---- where x is 2,3,10.
Show ip eigrp neighbours
IP-EIGRP neighbors for process 100
H Address Interface Hold Uptime SRTT RTO Q
Seq
(sec) (ms) Cnt
Num
0 130.1.26.2 Gi0/1 13 20:56:34 1 200 0
113
IP-EIGRP neighbors for process 10
H Address Interface Hold Uptime SRTT RTO Q
Seq
(sec) (ms) Cnt
Num
0 54.1.1.254 Se0/0/0 13 00:01:12 364 2184 0
2
Show frame-relay PVC | in DLCI
DLCI = 51, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
Serial0/0/0
DLCI = 100, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
Serial0/0/0
DLCI = 101, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
Serial0/0/0
DLCI = 201, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
Serial0/0/0
DLCI = 301, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
Serial0/0/0
DLCI = 401, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
Serial0/0/0
interface Serial0/0/0
ip address 54.1.1.6 255.255.255.0
encapsulation frame-relay
ip summary-address eigrp 100 130.1.0.0 255.255.0.0 5
frame-relay map ip 54.1.1.254 101 broadcast
no frame-relay inverse-arp
!
EIGRP CONFIG
router eigrp 100
network 130.1.26.6 0.0.0.0
network 150.1.6.6 0.0.0.0
no auto-summary
eigrp router-id 150.1.6.6
!
router eigrp 10
network 54.1.1.6 0.0.0.0
no auto-summary
!
This is an ADJ to BB1 and on BB1 the eigrp network statement is 54.0.0.0
0.255.255.255
Is this an IOS issue? PVCs are active but they are unused.
Any suggestions would be appreciated,
Faryar
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:59 GMT-3