From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Thu Apr 27 2006 - 00:57:52 GMT-3
What does your specific configuration look like? You need to apply the
prepending out to an EBGP neighbor, not to the aggregate-address
statement itself.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> george stanza
> Sent: Wednesday, April 26, 2006 8:44 PM
> To: Cisco certification
> Subject: BGP Aggregate-address question
>
> in the aggregate-address command that i am using i want to prepend
as-path
> information but it says
>
> "% "AGGREGATE" used as BGP attribute route-map, set as-path prepend
not
> supported"
>
> From the 'show ip bgp' the as-path list that i get is
>
> *> 115.114.0.0/21 13.4.1.1 0 100 0 (64511)
200
> i
>
> But i want to make it
>
> *> 115.114.0.0/21 13.4.1.1 0 100 0 (64513)
200
> 100 i
>
> Any idea how i can do that ?
>
> //G
>
>
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:59 GMT-3