From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Sun Apr 23 2006 - 21:54:51 GMT-3
Hi Azhar try this
conf ter
access-list 123 permit tcp any any eq telnet
end
debug ip paquet 123 detail
Rack1R4(config)#access-list 100 permit tcp host 10.3.3.3 any eq
telnet
Rack1R4(config)#line vty
0
Rack1R4(config-line)#access-class 100
in
Rack1R4(config-line)#
BB1-TS#3
[Resuming connection 3 to R3 ...
]
Rack1R3#telnet 10.4.4.4
/sou
Rack1R3#telnet 10.4.4.4 /source-interface
lo0
Trying 10.4.4.4 ...
Open
Password required, but none
set
[Connection to 10.4.4.4 closed by foreign
host]
Rack1R3#
azhar mumtaz escribis:
> Hi Victor:
>
> I tried the access-list that you mentioned, but it did
> not work. If I configure
>
> access-list 100 permit host 3.3.3.3 any eq telnet
>
> wont it allow telnet from 3.3.3.3 to any . We want
> only R1 to telnet to R3 loopback address.
>
> Thanks
> Azhar
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:59 GMT-3