From: Reinhold Fischer (Reinhold.Fischer@gmx.net)
Date: Sun Apr 23 2006 - 05:44:36 GMT-3
Hello Dave,
the route-map INJECT should look like this:
route-map INJECT permit 10
set ip address prefix-list INJECT
except this, the config looks ok to me.
For troubleshooting: debug ip bgp
show ip bgp injected-paths
regards
reinhold
On Sat, Apr 22, 2006 at 11:40:46PM -0400, Schulz, Dave wrote:
> Here is an issue with the inject map that have not been able to solve. There
> is a summary route that is coming from a neighbor in the same AS
> (192.168.1.2). I am trying to inject a more specific route into the bgp
> process, as I understand the purpose of the inject from the docCD.
> Unfortunately, the more specific route is not being injected. Thoughts?
>
> !
> router bgp 100
> no synchronization
> bgp log-neighbor-changes
> bgp inject-map INJECT exist-map EXIST
> neighbor 192.168.1.2 remote-as 100
> neighbor 192.168.1.2 route-reflector-client
> neighbor 192.168.1.3 remote-as 100
> no auto-summary
> !
> !
> ip prefix-list EXIST seq 5 permit 12.230.0.0/20
> !
> ip prefix-list INJECT seq 5 permit 12.230.2.0/24
> !
> ip prefix-list SOURCE seq 5 permit 192.168.1.2/32
> !
> route-map INJECT permit 10
> match ip address prefix-list INJECT
> !
> route-map EXIST permit 10
> match ip address prefix-list EXIST
> match ip route-source SOURCE
> !
> !
>
> R1#sh ip bgp
> BGP table version is 43, local router ID is 10.1.1.1
> Status codes: s suppressed, d damped, h history, * valid, > best, i -
> internal,
> r RIB-failure, S Stale
> Origin codes: i - IGP, e - EGP, ? - incomplete
> Network Next Hop Metric LocPrf Weight Path
> *>i12.230.0.0/20 192.168.1.2 0 100 0 i
> R1#
>
>
> Dave
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:59 GMT-3