From: Matt White (mwhite23@gmail.com)
Date: Sat Apr 22 2006 - 21:05:01 GMT-3
I do not believe that to be correct. For VLAN ID to propagate form a
server to a client, you ned the VTP domain to match.
For DTP to work on a trunk, one needs to be switchport dynamic auto
and the other end desirable. Trunk encapsulation will auto-negotiate
as well if left to the default.
DTP has nothing to do with VTP.
On 4/22/06, James Ventre <messageboard@ventrefamily.com> wrote:
> Let me clarify a bit further:
>
> For DTP to form a trunk with the other end, your VTP domain needs to
> match on both ends. This would be an instance where you need to set
> the domain with a mode of transparent.
>
>
>
> James
>
>
>
> James Ventre wrote:
> > For DTP to form a trunk it has to match on both ends of the link.
> >
> >
> >
> > Hash Aminu wrote:
> >> Hello GS,
> >>
> >> just to clear this issue if i am running in VTP Transparent mode , do
> >> i need
> >> to make sure that the VTP domain name is the same or configure it at
> >> all? i
> >> feel there is no need since i am not running VTP, but can anyone think of
> >> any situation where we need to configure the VTP domain name in
> >> Transparent
> >> mode .
> >> TIA
> >>
> >> Hash
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:59 GMT-3