From: victor.oporto@empresas.telefonica.es
Date: Wed Apr 19 2006 - 06:37:05 GMT-3
Hi, I think that the 75% is the default reserveable bw for WFQ not
for the traffic shaping.
Regards
"Mohammed Shameen Abdul Jabbar" <ccie.xpert@gmail.com>
Enviado por: nobody@groupstudy.com
19/04/2006 11:30
Por favor, responda a "Mohammed Shameen Abdul Jabbar"
Para: "Cisco certification" <ccielab@groupstudy.com>
cc:
Asunto: Frame relay Traffic shapping
Hi,
I have a question on the frame-relay traffic shapping.
If in the question, it is mentioned that the port speed of s0/0 is 512K &
DLCI 204 uses 128k, The remaining two DLCI's 201 and 203 share the "
remaining-bandwidth".
I am confused on the term "remaining-bandwidth" . I have read that , only
75% of the port banwidth is used for normal traffic.
So the remaining bandwith should be calculated as :
512 x 75/100 =
384kbps
DLCI 204 =
128kbps
DLCI 201 = DLCI 203
=
(384 - 128)/2 = 256/2 = 128kbps
OR is it calculated as
DLCI 204 = 128Kbps
DLCI 201 = DLCI 203
=
(512 - 128)/2 = 192Kbps
Can anyone tell me which one is the correct method.
Regards
shamin
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:58 GMT-3