From: Mohammed Shameen Abdul Jabbar (ccie.xpert@gmail.com)
Date: Mon Apr 17 2006 - 13:40:59 GMT-3
The config on R6 is as below:
Rack1R6#
!
!
!
interface Loopback0
ip address 150.1.6.6 255.255.255.0
!
interface Ethernet0/0
no ip address
half-duplex
!
interface Ethernet0/0.6
encapsulation dot1Q 6 native
ip address 132.1.6.6 255.255.255.0
no snmp trap link-status
!
interface Ethernet0/0.26
encapsulation dot1Q 26
ip address 132.1.26.6 255.255.255.0
ip summary-address eigrp 10 200.0.0.0 255.255.252.0 5
no snmp trap link-status
!
interface Serial0/0
ip address 54.1.2.6 255.255.255.0
encapsulation frame-relay
no dce-terminal-timing-enable
no fair-queue
!
interface TokenRing0/0
no ip address
shutdown
ring-speed 16
!
interface Ethernet1/0
no ip address
shutdown
half-duplex
!
router eigrp 10
network 54.1.2.6 0.0.0.0
network 132.1.26.6 0.0.0.0
network 150.1.6.6 0.0.0.0
no auto-summary
eigrp router-id 150.1.6.6
neighbor 132.1.26.2 Ethernet0/0.26
!
ip http server
*****************************X*****************X*****************************
The configuration on BB1 is as follows:
BB1#
!
!
!
!
interface Loopback0
ip address 200.1.0.1 255.255.255.0
!
interface Loopback1
ip address 200.1.1.1 255.255.255.0
!
interface Loopback2
ip address 200.1.2.1 255.255.255.0
!
interface Loopback3
ip address 200.1.3.1 255.255.255.0
!
interface Loopback11
ip address 150.1.11.11 255.255.255.0
!
interface Ethernet0
no ip address
shutdown
!
interface Serial0
ip address 54.1.2.254 255.255.255.0
encapsulation frame-relay
!
interface Serial1
no ip address
shutdown
!
router eigrp 10
network 54.1.2.254 0.0.0.0
network 150.1.11.11 0.0.0.0
network 200.1.0.1 0.0.0.0
network 200.1.1.1 0.0.0.0
network 200.1.2.1 0.0.0.0
network 200.1.3.1 0.0.0.0
no auto-summary
eigrp router-id 150.1.11.11
no eigrp log-neighbor-changes
!
router rip
network 204.12.1.0
!
ip classless
ip http server
*************************X*******************X****************************
The sh ip route on R6 is as follows:
Rack1R6#
Gateway of last resort is not set
D EX 204.12.1.0/24 [170/2560537856] via 132.1.26.2, 00:05:43, Ethernet0/0.26
D 200.1.0.0/24 [90/2297856] via 54.1.2.254, 00:08:45, Serial0/0
54.0.0.0/24 is subnetted, 1 subnets
C 54.1.2.0 is directly connected, Serial0/0
D 200.1.1.0/24 [90/2297856] via 54.1.2.254, 00:08:45, Serial0/0
D 200.1.2.0/24 [90/2297856] via 54.1.2.254, 00:08:45, Serial0/0
D 200.1.3.0/24 [90/2297856] via 54.1.2.254, 00:08:45, Serial0/0
132.1.0.0/16 is variably subnetted, 9 subnets, 2 masks
D EX 132.1.0.4/32 [170/2560537856] via 132.1.26.2, 00:05:44, Ethernet0/0.26
C 132.1.6.0/24 is directly connected, Ethernet0/0.6
D EX 132.1.0.1/32 [170/2560537856] via 132.1.26.2, 00:05:44, Ethernet0/0.26
D EX 132.1.3.0/24 [170/2560537856] via 132.1.26.2, 00:05:44, Ethernet0/0.26
D 132.1.23.0/24 [90/2195456] via 132.1.26.2, 00:07:38, Ethernet0/0.26
D EX 132.1.17.0/24
[170/2560537856] via 132.1.26.2, 00:05:45, Ethernet0/0.26
C 132.1.26.0/24 is directly connected, Ethernet0/0.26
D EX 132.1.33.0/24
[170/2560537856] via 132.1.26.2, 00:05:45, Ethernet0/0.26
D 132.1.35.0/24 [90/2707456] via 132.1.26.2, 00:05:45, Ethernet0/0.26
150.1.0.0/16 is variably subnetted, 8 subnets, 2 masks
D EX 150.1.7.0/24 [170/2560537856] via 132.1.26.2, 00:05:45, Ethernet0/0.26
C 150.1.6.0/24 is directly connected, Loopback0
D 150.1.5.0/24 [90/2835456] via 132.1.26.2, 00:05:45, Ethernet0/0.26
D 150.1.3.0/24 [90/2323456] via 132.1.26.2, 00:05:45, Ethernet0/0.26
D 150.1.2.0/24 [90/409600] via 132.1.26.2, 00:07:39, Ethernet0/0.26
D EX 150.1.4.4/32 [170/2560537856] via 132.1.26.2, 00:05:45, Ethernet0/0.26
D EX 150.1.1.1/32 [170/2560537856] via 132.1.26.2, 00:05:46, Ethernet0/0.26
D 150.1.11.0/24 [90/2297856] via 54.1.2.254, 00:08:47, Serial0/0
150.3.0.0/24 is subnetted, 1 subnets
D EX 150.3.11.0 [170/2560537856] via 132.1.26.2, 00:05:46, Ethernet0/0.26
*****************X**************************X*************************************
The show ip route on R2:
Rack1R2#
Gateway of last resort is not set
D EX 204.12.1.0/24 [109/2560512256] via 132.1.23.3, 00:06:42, Serial0/1
D 200.1.0.0/24 [90/2323456] via 132.1.26.6, 00:08:36, Ethernet0/0
54.0.0.0/24 is subnetted, 1 subnets
D 54.1.2.0 [90/2195456] via 132.1.26.6, 00:08:36, Ethernet0/0
D 200.1.1.0/24 [90/2323456] via 132.1.26.6, 00:08:36, Ethernet0/0
D 200.1.2.0/24 [90/2323456] via 132.1.26.6, 00:08:36, Ethernet0/0
D 200.1.3.0/24 [90/2323456] via 132.1.26.6, 00:08:36, Ethernet0/0
132.1.0.0/16 is variably subnetted, 10 subnets, 2 masks
D EX 132.1.0.4/32 [109/2560512256] via 132.1.23.3, 00:06:43, Serial0/1
D EX 132.1.0.1/32 [109/2560512256] via 132.1.23.3, 00:06:43, Serial0/1
C 132.1.0.0/24 is directly connected, Serial0/0
D EX 132.1.3.0/24 [109/2560512256] via 132.1.23.3, 00:06:43, Serial0/1
O 132.1.0.3/32 [110/64] via 132.1.0.3, 00:18:21, Serial0/0
C 132.1.23.0/24 is directly connected, Serial0/1
D EX 132.1.17.0/24 [109/2560512256] via 132.1.23.3, 00:06:43, Serial0/1
C 132.1.26.0/24 is directly connected, Ethernet0/0
D EX 132.1.33.0/24 [109/2560512256] via 132.1.23.3, 00:06:43, Serial0/1
D 132.1.35.0/24 [90/2681856] via 132.1.23.3, 00:06:43, Serial0/1
150.1.0.0/16 is variably subnetted, 8 subnets, 2 masks
D EX 150.1.7.0/24 [109/2560512256] via 132.1.23.3, 00:06:43, Serial0/1
D 150.1.6.0/24 [90/409600] via 132.1.26.6, 00:08:37, Ethernet0/0
D 150.1.5.0/24 [90/2809856] via 132.1.23.3, 00:06:43, Serial0/1
D 150.1.3.0/24 [90/2297856] via 132.1.23.3, 00:06:43, Serial0/1
C 150.1.2.0/24 is directly connected, Loopback0
D EX 150.1.4.4/32 [109/2560512256] via 132.1.23.3, 00:06:43, Serial0/1
D EX 150.1.1.1/32 [109/2560512256] via 132.1.23.3, 00:06:44, Serial0/1
D 150.1.11.0/24 [90/2323456] via 132.1.26.6, 00:08:38, Ethernet0/0
150.3.0.0/24 is subnetted, 1 subnets
D EX 150.3.11.0 [109/2560512256] via 132.1.23.3, 00:06:44, Serial0/1
***************X**********************X*******************************************
The connection topology is as below:
(Other routers)-----OSPF------ R2 ----EIGRP--- R6 ----EIGRP---- BB1
|
EIGRP
|
(Other routers)
On 4/17/06, Faryar Zabihi (fzabihi) <fzabihi@cisco.com> wrote:
> Do you get the summary route with this config? You are only summarizing
> 200.0.1.0 - 200.0.2.0 with this statement.
> Send me copy of sh ip route...
> Btw, the reason I copied groupstudy on my last email is b/c thismight be
> helpful to others as well...up to u.
>
> Faryar Zabihi
>
>
> -----Original Message-----
> From: Mohammed Shameen Abdul Jabbar [mailto:ccie.xpert@gmail.com]
> Sent: Monday, April 17, 2006 9:59 AM
> To: Faryar Zabihi (fzabihi)
> Subject: Re: IEWB VER3.0 LAB-2 TASK-4.6
>
> Hi ,
>
> I will put the relevant config..
>
>
> Rack1R6#
>
> interface Loopback0
> ip address 150.1.6.6 255.255.255.0
> !
> interface Ethernet0/0
> no ip address
> half-duplex
> !
> interface Ethernet0/0.6
> encapsulation dot1Q 6 native
> ip address 132.1.6.6 255.255.255.0
> no snmp trap link-status
> !
> interface Ethernet0/0.26
> encapsulation dot1Q 26
> ip address 132.1.26.6 255.255.255.0
> ip summary-address eigrp 10 200.0.0.0 255.255.252.0 5 no snmp trap
> link-status !
> interface Serial0/0
> ip address 54.1.2.6 255.255.255.0
> encapsulation frame-relay
> no dce-terminal-timing-enable
> no fair-queue
> !
> interface TokenRing0/0
> no ip address
> shutdown
> ring-speed 16
> !
> interface Ethernet1/0
> no ip address
> shutdown
> half-duplex
> !
> router eigrp 10
> network 54.1.2.6 0.0.0.0
> network 132.1.26.6 0.0.0.0
> network 150.1.6.6 0.0.0.0
> no auto-summary
> eigrp router-id 150.1.6.6
> neighbor 132.1.26.2 Ethernet0/0.26
>
>
> Rack1R2#
>
>
> !
> !
> interface Loopback0
> ip address 150.1.2.2 255.255.255.0
> !
> interface Ethernet0/0
> ip address 132.1.26.2 255.255.255.0
> half-duplex
> !
> interface Serial0/0
> ip address 132.1.0.2 255.255.255.0
> encapsulation frame-relay
> ip ospf network point-to-multipoint
> no dce-terminal-timing-enable
> frame-relay lmi-type cisco
> !
> interface Serial0/1
> ip address 132.1.23.2 255.255.255.0
> compress stac
> no dce-terminal-timing-enable
> !
> router eigrp 10
> network 132.1.23.2 0.0.0.0
> network 132.1.26.2 0.0.0.0
> network 150.1.2.2 0.0.0.0
> distance eigrp 90 109
> no auto-summary
> eigrp router-id 150.1.2.2
> neighbor 132.1.26.6 Ethernet0/0
> !
> router ospf 1
> router-id 150.1.2.2
> log-adjacency-changes
> network 132.1.0.2 0.0.0.0 area 0
> !
>
> The setup is something like this. R6 is connected to R2 through eigrp
> and R2 is connected to the rest of the network through ospf interface
> and another eigrp interface. I get all the individual routes in the
> 200.x.x.x range in all the other routers in the IGP domain.
>
>
> regards
> Thanks for your help.
>
> On 4/17/06, Faryar Zabihi (fzabihi) <fzabihi@cisco.com> wrote:
> >
> > Do you have a leak map on the summary address? Can you post your
> > relevant config?
> > Thnx,
> > Faryar
> >
> > -----Original Message-----
> > From: Mohammed Shameen Abdul Jabbar [mailto:ccie.xpert@gmail.com]
> > Sent: Sunday, April 16, 2006 11:14 PM
> > To: Faryar Zabihi (fzabihi)
> > Subject: Re: IEWB VER3.0 LAB-2 TASK-4.6
> >
> > Thanks , I did not advertise it. Now I did. it works. Thers another
> > issue. I get the summary address as well as the individual addresses.
> > As per the lab requirement , other routers in the eigrp domain should
> > only see the summary address.
> >
> > regards
> > shamin
> >
> > On 4/16/06, Faryar Zabihi (fzabihi) <fzabihi@cisco.com> wrote:
> > > Did you advertise the routes into eigrp before summerizing?
> > >
> > > -----Original Message-----
> > > From: Mohammed Shameen Abdul Jabbar
> > [mailto:ccie.xpert@gmail.com]
> > > Sent: Sun Apr 16 15:19:03 2006
> > > To: Cisco certification
> > > Subject: IEWB VER3.0 LAB-2 TASK-4.6
> > >
> > > Hi,
> > >
> > > I am using the IEWB VER3.0. Doing LAB-2 TASK-4.6.
> > > It requires to do a " ip summary-address eigrp ..." command under a
> > > ethernet sub-interface.
> > > The problem i face is that , I am not able to see the route I am
> > > summarising in the routing table of other routers, I followed the
> > > solution guide also, but not able to get it work.
> > > In the lab workbook it is dome on a Gigabit ethernet sub interface
> > > where as I am using normal ethernet sub-interface. Will this be of
> > > any
> >
> > > implications?.
> > >
> > > Regards
> > > shamin
> > >
> > > ____________________________________________________________________
> > > __ _ Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:57 GMT-3