From: Guyler, Rik (rguyler@shp-dayton.org)
Date: Mon Apr 17 2006 - 12:07:47 GMT-3
But the original question said "the serial interface is not up during
working hours of 5pm and 6am". Does this mean the interface itself is not
up/up or does it mean not moving data?
Rik
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Schulz, Dave
Sent: Monday, April 17, 2006 10:25 AM
To: Naveed Khan; CCIEin2006
Cc: Cisco certification
Subject: RE: Backup Interface
You're welcome, Naveed.
________________________________
From: Naveed Khan [mailto:naveed_k@hotmail.com]
Sent: Mon 4/17/2006 1:22 PM
To: Schulz, Dave; CCIEin2006
Cc: Cisco certification
Subject: Re: Backup Interface
Yes I got it. I thought it just like backup interface command. Thankx a lot.
Naveed
----- Original Message -----
From: Schulz, Dave <mailto:DSchulz@dpsciences.com>
To: Naveed Khan <mailto:naveed_k@hotmail.com> ; CCIEin2006
<mailto:ciscocciein2006@gmail.com>
Cc: Cisco certification <mailto:ccielab@groupstudy.com>
Sent: Monday, April 17, 2006 7:18 AM
Subject: RE: Backup Interface
You apply it directly in the access list....you must use the
extended acl....
access-list 100 permit ip any any time-range WORK_HRS
interface s0/0
ip access-group 100 in
HTH,
Dave
________________________________
From: Naveed Khan [mailto:naveed_k@hotmail.com]
Sent: Mon 4/17/2006 1:13 PM
To: CCIEin2006; Schulz, Dave
Cc: Cisco certification
Subject: Re: Backup Interface
Hi
I understand that I could setup time-range but how I apply that.
Naveed
----- Original Message -----
From: CCIEin2006 <mailto:ciscocciein2006@gmail.com>
To: Schulz, Dave <mailto:DSchulz@dpsciences.com>
Cc: Naveed Khan <mailto:naveed_k@hotmail.com> ; Cisco
certification <mailto:ccielab@groupstudy.com>
Sent: Monday, April 17, 2006 7:11 AM
Subject: Re: Backup Interface
Okay, but thats more for a dialer interface, how do you
apply it to a point to point circuit?
On 4/17/06, Schulz, Dave <DSchulz@dpsciences.com> wrote:
Take a look at time-ranges applied to an ACL. HTH.
Dave
________________________________
From: nobody@groupstudy.com on behalf of Naveed Khan
Sent: Mon 4/17/2006 12:13 PM
To: Cisco certification
Subject: Backup Interface
Hello
Any clue for this scenario?
Configure RouterA and RouterB so the serial
interface is not up during
working
hours of 5pm and 6am.
Naveed
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:57 GMT-3