From: Loc Pham (loc.pham@comcast.net)
Date: Sun Apr 16 2006 - 12:44:28 GMT-3
Chuck: I have couple of 265x non-XM that operate within lab environment with 12.4 Adv.Ent.Ser. and they seem to be fine.
With a production router, I would follow FN, since they load the image into RAM, and the 2650XM does support upto 256M RAM .
lP.
-------------- Original message ----------------------
From: "Church, Chuck" <cchurch@netcogov.com>
> Along these same lines, has anyone tried running a 12.4 image on a 2650
> (non-XM version)? This router will support up to 32 meg flash, 128 meg
> RAM. All the various 12.4 images I looked at (Advanced [Security | IP
> Services | Enterprise Services] had requirements of 128/32. It's a
> production router, so booting from flash is a necessity, as well as
> reliable operation in general. If the 2650 and 2650XM can run the same
> code, I'm curious why they don't list a 12.4 image for the 2650. Any
> ideas?
>
> Thanks,
>
> Chuck Church
> Network Engineer
> CCIE #8776, MCNE, MCSE
> Netco Government Services
> Enterprise Network Engineering
> Home Office - 864-335-9473
> Cell - 864-266-3978
> cchurch@netcogov.com
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Brian McGahan
> Sent: Saturday, April 15, 2006 8:01 PM
> To: rocco ******; ccielab@groupstudy.com
> Subject: RE: IOS help
>
> Hi Rocco,
>
> You can boot the XM images via TFTP. See this link for more
> info:
>
> http://www.internetworkexpert.com/resources/tftpdnld.htm
>
>
> HTH,
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > rocco ******
> > Sent: Saturday, April 15, 2006 9:17 AM
> > To: ccielab@groupstudy.com
> > Cc: roccor21@hotmail.com
> > Subject: IOS help
> >
> > Hi, I am currently putting together an IEWB lab and have run into a
> > snag. I have a couple 2611 routers and need to run OSPFv3 IPv6. Does
> > anybody have 12.2(15)T7 handy?? I know its a DF now but its the only
> one
> > that had the OSPFv3 for the 2610-13 (not XM). Also, if anybody has
> > Enterprise Plus 12.2(15)T16 for the 2600's (not XM) that would help as
> > well. Thanks
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:57 GMT-3