From: Magmax (magmax@bigpond.net.au)
Date: Sat Apr 15 2006 - 20:22:08 GMT-3
Guys,
I have also seen some answers in IE solutions are not correct. In
non-broadcast you have to use neighbour command.
Another thing always use IE discussion forum people do give correct answers
I did a mock lab yesterday and I got stuck. Answer was not correct in
solution guide and I have never seen that problem but after the lab I saw my
answer in discussion forum
Ubaid
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jeffrey Lacouture
Sent: Sunday, 16 April 2006 8:56 AM
To: CCIEin2006
Cc: ccielab@groupstudy.com
Subject: Re: IE LAB 17 task 4.1 - for the Brians please
Not sure if the "non-broadcast" solution works, but another solution to this
would be to set S0/0.125 to "ip ospf broadcast". You then have to change the
timers on R5. Be sure to still set the priority on R5 so that it becomes the
DR.
Jeff
On 4/15/06, CCIEin2006 <ciscocciein2006@gmail.com> wrote:
>
> This question is for Brian Dennis or Brian McGahan but anyone else can
> feel
> free to chime in.
>
> Regarding IE version 3 Volume 1, Lab 17, task 4.1:
>
> The task states to configure OSPF between R1, R2, and R5 which are
> connected
> by a multipoint frame relay network with R5 as the hub.
>
> The task states to NOT use the neighbor command to accomplish this and it
> also states not to use any interface level commands on R1 or R2 (which
> rules
> out changing the ospf network type on these routers).
>
> Your solution states to use ospf network type non-broadcast and does not
> include any neighbor statements.
>
> Aren't you required to use neighbor statements when configuring
> non-broadcast?
>
> I tried your solution but adjacency is not being established across the
> frame relay network.
> What is the correct solution?
>
> Thanks in advance!
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:57 GMT-3