From: Faryar Zabihi \(fzabihi\) (fzabihi@cisco.com)
Date: Thu Apr 13 2006 - 23:20:14 GMT-3
As you might well know...AD will not work here. You might be able to
accomplish this through having another OSPF process but haven't tried.
You can also change routing protocol for those routes(but you probably
don't want that) Also if you want to get yourself into a mess read
this(I have and never implemented)
http://mirrors.isc.org/pub/www.watersprings.org/pub/id/draft-mirtorabi-o
spf-tunnel-adjacency-00.txt
I suggest you take a step back and see what the requirement really wants
you to do.
Faryar Zabihi
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
James Simons
Sent: Thursday, April 13, 2006 6:51 PM
To: Cisco certification
Subject: OSPF route preferencing
Hello all,
Another OSPF question for you all. OSPF always prefers intra-area
routes over inter-area routes, regardless of the route cost right? Is
there anyway to get a router to prefer an inter-area route? If there
are multiple methods, I would like to know as many of them as possible
since you never know what you will be allowed to do in the lab.
thanks,
Jimmy
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:57 GMT-3