From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Sun Apr 09 2006 - 08:47:21 GMT-3
I guess so... the fine line here is how to apply this mcast rate-limit..
inbound or outbound ... for example if they ask "rate-limit traffic for
mcast group 224.1.1.1 to 50 KBps on fa0/1 of router R6" ... Does this mean
that receivers are conected to this interface or multicast source?
Good approach is probably to apply it in both directions. :-)
A.
----- Original Message -----
From: "Nick Griffin" <ngriffin@sio.midco.net>
To: <ccielab@groupstudy.com>
Sent: Saturday, April 08, 2006 11:09 PM
Subject: Multicast Rate Limiting
> If asked to restrict the mcast transmission rate, on a per group, per
> interface basis, is the "ip multicast rate-limit" command the best option,
> if asked to restrict mcast rate in a lab on the mcast section?
>
> TIA
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3