From: Bob Sinclair (bob@bobsinclair.net)
Date: Sat Apr 08 2006 - 19:51:17 GMT-3
KC,
My take on it would be the following, given what you have told us:
According to RFC 3513, Site-local addresses have the following format:
Site-Local addresses have the following format:
| 10 |
| bits | 54 bits | 64 bits |
+----------+-------------------------+----------------------------+
|1111111011| subnet ID | interface ID |
+----------+-------------------------+----------------------------+So,
FEC0:0:0:2::2/64Look right to you?Bob SinclairCCIE #10427, CCSI
30427www.netmasterclass.net----- Original Message -----
From: KC
To: Group Study (E-mail)
Sent: Saturday, April 08, 2006 5:55 PM
Subject: IPv6
Hey Guys
I took the lab 2 days back , and i failed . I just wanna know about one
question which is a doubtful to me .
Say if the question is :- Configure IPv6 Site local address on loopback
11.11.2.2 . Use subnet id as 3rd octet of your IPv4 address and interface
id
as 4th octet of ipv4. What will be the IPv6 address and How ??
Any inputs would be appreciated.
Thanks in advance
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3