From: KC (kanwal.chawla@gmail.com)
Date: Tue Apr 04 2006 - 23:24:37 GMT-3
Very strange to me, I requested 3 times to people to give me the config. of
HSRP Routers and Switch , but noone responded me with right solution . What
happened to you guys, i am stuck , ehlp me , this is the i guess last
question i am asking before lab
On 4/4/06, KC <kanwal.chawla@gmail.com> wrote:
>
> Hey Guys
>
> Whenever i configure this thing on one of Switchport, my both routers HSRP
> came up in Active states, noone is going standby
> switchport access vlan 10
> switchport mode access
> switchport port-security
> switchport port-security maximum 2
> switchport port-security mac-address sticky
> switchport port-security mac-address sticky 0000.0c07.ac01
> mac-address
> switchport port-security mac-address sticky 0008.a3fc.a661
>
>
> On 4/4/06, Chris Lewis <chrlewiscsco@gmail.com> wrote:
> >
> > KC, I believe the answer to your question will only be found in the
> > exact wording of the question, which can take many, many forms.
> >
> > If you use BIA there will only be one MAC address associated with each
> > port, the downside of this is that traffic will be dropped as the switch
> > moves that MAC address from one port to another. You can test this easily
> > with an extended ping to the HSRP address, or to an address that is only
> > reachable via the HSRP setup.
> >
> > Remember the lab has nothing to do with what makes sense from a
> > deployment perspective, it is only tesing you on your ability to
configure
> > the equipment to do exactly what the question asks.
> >
> > Chris
> >
> > On 4/4/06, KC < kanwal.chawla@gmail.com> wrote:
> >
> > > Hey Guys,
> >
> > I know this question has been discussed lots of time , but i just hve
> > one
> > doubt, If we use ((standby use-bia) command in HSRP with Port security ,
> >
> > Router will use its burnt-in address rather to typically HSRP virtual
> > address. The problem is whenever standby router will become active,
> > the virtual mac_Address will be moved to diffrent router. Will it be
> > acceptable in Lab ??? Will the secodn router become active and failed
> > router
> > will become standby ???
> >
> > Any inputs please, i am clearifing becuase after 2 days i have a lab :D
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3