From: KC (kanwal.chawla@gmail.com)
Date: Tue Apr 04 2006 - 21:15:35 GMT-3
Hey Guys
Whenever i configure this thing on one of Switchport, my both routers HSRP
came up in Active states, noone is going standby
switchport access vlan 10
switchport mode access
switchport port-security
switchport port-security maximum 2
switchport port-security mac-address sticky
switchport port-security mac-address sticky 0000.0c07.ac01
mac-address
switchport port-security mac-address sticky 0008.a3fc.a661
On 4/4/06, Chris Lewis <chrlewiscsco@gmail.com> wrote:
>
> KC, I believe the answer to your question will only be found in the exact
> wording of the question, which can take many, many forms.
>
> If you use BIA there will only be one MAC address associated with each
> port, the downside of this is that traffic will be dropped as the switch
> moves that MAC address from one port to another. You can test this easily
> with an extended ping to the HSRP address, or to an address that is only
> reachable via the HSRP setup.
>
> Remember the lab has nothing to do with what makes sense from a deployment
> perspective, it is only tesing you on your ability to configure the
> equipment to do exactly what the question asks.
>
> Chris
>
> On 4/4/06, KC <kanwal.chawla@gmail.com> wrote:
>
> > Hey Guys,
>
> I know this question has been discussed lots of time , but i just hve one
> doubt, If we use ((standby use-bia) command in HSRP with Port security ,
> Router will use its burnt-in address rather to typically HSRP virtual
> address. The problem is whenever standby router will become active,
> the virtual mac_Address will be moved to diffrent router. Will it be
> acceptable in Lab ??? Will the secodn router become active and failed
> router
> will become standby ???
>
> Any inputs please, i am clearifing becuase after 2 days i have a lab :D
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3