From: Scott Thornton (scthornton@gmail.com)
Date: Mon Apr 03 2006 - 15:55:54 GMT-3
If you can match their diagram with interfaces etc., you should be able to
utilize their workbooks. The only thing is you won't be able to use some
features because of your older IOS. I would suggest for those, renting rack
time with one of the multiple vendors (search the archives for Group Study
to get a list of preferred vendors).
HTH.
Scott
Scott C Thornton
http://www.scthornton.com
On 4/2/06, Joel Desaulniers <joeldesaulniers@gmail.com> wrote:
>
> Hi Everyone,
>
>
>
> I'm beginning to prepare for the CCIE - RS lab and I was curious as to
> whether or not the IEWB-RS Lab Workbook would be useful for me based on
> the equipment that I'm currently using for my preparation. Currently I
> have 6 routers connected together using a frame-relay switch (2522
> router) and I also have 2 2924 switches. I believe the workbook will
> allow me to prepare properly, but I will use rack rental to fill in for
> the Multi-layer switching segment because I do not have layer-3
> switches.
>
>
>
> Based on my setup, do you think I'll be able to do most of the scenarios
> in the workbook, or is there something that I'm missing?
>
>
>
> Thanks,
>
>
>
> Joel Desaulniers
> Network Analyst
>
> CCNP, CCNA
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Scott C ThorntonNotice: This e-mail (including attachments) is covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is confidential and may be legally privileged. If you are not the intended recipient, you are hereby notified that any retention, dissemination, distribution, or copying of this communication is strictly prohibited. Please reply to the sender that you have received the message in error, then delete it. Thank you.
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3