From: Vincent Mashburn (vmashburn@fedex.com)
Date: Mon Apr 03 2006 - 10:08:57 GMT-3
The Phone jack in your wall is a FXS port, so you will have to connect
it to a FXO port on your 2611 gateway. Other than that, it should work.
So, it would be:
Phone Line ----> 2611 Gateway (FXO) ----> Internet ----> AS5400 ---->
PSTN via FXO card. If you were connecting telephone stations rather
than uplinks / downlinks from the PSTN, then you would use FXS in lieu
of FXO. Hope this helps.
Vince Mashburn
Voice / Data Engineer
901-263-5072
Cisco IP Telephony Support Specialist
CCNP, CCDA,Network +
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Xy Hien Le
Sent: Sunday, April 02, 2006 10:05 AM
To: ccielab@groupstudy.com
Subject: FXS and FXO
Hi,
Sorry for the OT but do anyone have a sample configuration of the follow
setup
for FXS and FXO ports? Could this setup work?
Phone Line --------->FXO and FXS on
2611------->Internet----------->Voice GW
(AS5400)--------->PSTN
Thanks in advance.
X
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3