From: Jens Petter Eikeland (jenseike@start.no)
Date: Mon Apr 03 2006 - 09:19:53 GMT-3
Hi ,
Not quite what i had in mind.. This involves disabling routing on the
router, and I cant do that...
This is what I have...
Several bridge groups that are linked today to several atm subinterface...
this are : xdsl
We have now a new pop router that we are linking up to.. this is trough
a vpdn tunnel, we are the LNS router..
The CEP equipment are pppoe routers that are connecting troug the POP
network and then trough the l2tp tunnel to our router.. We have a RADIUS
That are authentication and sharing out a ip address to the CPE equipment
We have this config (this is to the new POP) :
vpdn-group 1
description Default L2TP VPDN Group
accept-dialin
protocol l2tp
virtual-template 1
lcp renegotiation on-mismatch
l2tp tunnel password 0 xxxxxxxx
interface GigabitEthernet0/3
description # Link XXX #
ip address XXX.XXX.XXX:XXX 255.255.255.252
duplex full
speed 1000
media-type gbic
negotiation auto
interface Virtual-Template1
description XCORE DSL via Nextgentel
ip unnumbered GigabitEthernet0/3
ip verify unicast reverse-path
no ip redirects
no ip proxy-arp
ip mroute-cache
ntp disable
no peer default ip address
ppp authentication chap pap
end
Then we have from earlier several bridge groups that are linked to our old
ATM stuff
bridge 1 protocol ieee
bridge 1 route ip
bridge 1 aging-time 3600
bridge 2 protocol ieee
bridge 2 route ip
bridge 2 aging-time 3600
bridge 3 protocol ieee
bridge 3 route ip
bridge 3 aging-time 3600
interface ATM1/0.105 point-to-point
bridge-group 1
pvc 60413667 18/32
ubr 1024
oam-pvc manage
encapsulation aal5snap
!
interface ATM1/0.105 point-to-point
bridge-group 1
pvc 60413667 18/32
ubr 1024
oam-pvc manage
encapsulation aal5snap
!
And so......
So how can I transfere our bridging config ower to the new ppp/pppoe system
????
Jens
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Petr
Lapukhov
Sent: 3. april 2006 13:55
To: Jens Petter Eikeland
Cc: Cisco certification
Subject: Re: ppp/bridge group
Yes, check out BCP
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123
t
/123t_2/gt_bcp.htm
2006/4/3, Jens Petter Eikeland <jenseike@start.no>:
>
> HI group...
>
>
>
> We are bridging many of our customers lan to lan connections. We are going
> to connect to a new POP using
>
> PPP. Will we be able to bridge still out customers on a PPP interface???
>
>
>
> Is this supported?
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3