From: Plank, Jason (JPlank@concordefs.com)
Date: Fri Mar 31 2006 - 20:35:54 GMT-3
Control+shift+6 rather... whoops!
-------------------
Jason Plank
Network Analyst
101 Bellevue Parkway
Wilmington, DE 19809
E-mail: JPlank@concordefs.com
Phone: 302-793-5913
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Plank, Jason
Sent: Friday, March 31, 2006 6:26 PM
To: Joel Desaulniers; ccielab@groupstudy.com
Subject: RE: Cancelling a Traceroute or a Ping
Control+shift+x once or twice by itself should do it.
-------------------
Jason Plank
Network Analyst
101 Bellevue Parkway
Wilmington, DE 19809
E-mail: JPlank@concordefs.com
Phone: 302-793-5913
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Joel
Desaulniers
Sent: Friday, March 31, 2006 6:07 PM
To: ccielab@groupstudy.com
Subject: Cancelling a Traceroute or a Ping
Hi everyone,
To knowledge, the escape sequence to end a ping or a traceroute is
Ctrl-Shift-6 and then X. The only problem is that this is also the escape
sequence to end a reverse Telnet session; because I'm using a terminal
server to access all of my routers this escape sequence only kicks me out of
my reverse telnet session and then when I go back into it the trace is still
going.
Any ideas?
-- Joel CCNP, CCNA
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3