From: Eric.Stuhl@ferguson.com
Date: Fri Mar 31 2006 - 13:28:11 GMT-3
Ctrl-v , then the character ?
Eric Stuhl
CCNP, CCDP, CCSE-NG
Ferguson Enterprises
eric.stuhl@ferguson.com
(757)-969-4146
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Nick Griffin
Sent: Friday, March 31, 2006 11:09 AM
To: Brian McGahan
Cc: Alexei Monastyrnyi; Victor Cappuccio; CCIE LAB
Subject: Re: key sequence
With that being said, whats the escape procedure so you can use the "?"
in an as path access list in the cli without envoking help? I forgot.
Thanks
Brian McGahan wrote:
> "ctrl+shift+6 6" or you can edit the BREAK character under the console
> of the devices you're connecting to from the terminal server.
>
>
> HTH,
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
>>
> Of
>
>> Alexei Monastyrnyi
>> Sent: Thursday, March 30, 2006 1:34 AM
>> To: Victor Cappuccio
>> Cc: CCIE LAB
>> Subject: Re: key sequence
>>
>> ctrl+shift+6 x
>>
>> on 30/03/2006 02:51 Victor Cappuccio wrote:
>>
>>> Hello List, please I wish to know, if there any key sequence to
>>>
> abort
>
>>> out the name resolution in the Router CLI, lets say I do not what to
>>> no ip domain-lookup
>>>
>>> Rack1R1# Rack1R1#show ip pim rp co
>>> Translating "co"...domain server (255.255.255.255)
>>> ^
>>> % Invalid input detected at '^' marker.
>>>
>>> Rack1R1#x^Z
>>> % Ambiguous command: "x"
>>> Rack1R1#show run | be line con
>>> line con 0
>>> logging synchronous
>>> transport preferred none
>>>
>>>
>>>
>
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3