From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Thu Mar 30 2006 - 11:53:10 GMT-3
good question for practicing in search across the DocCD...
here is help-yourself URL
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/qos_vcg.htm#wp1001619
on 30/03/2006 16:20 armonico wrote:
> Hi all
>
> Is it possible to configure priority queuing with MQC?
> I want to map packet marked with immediate(precedence) to priority high queue.
> I could not find the way to configure by using "priority-list".
>
> Rack3R1(config)#class-map PRECEDENCE
> Rack3R1(config-cmap)#match ip precedence immediate
>
> Rack3R1(config)#policy-map PRIORITY
> Rack3R1(config-pmap)#class PRECEDENCE
> Rack3R1(config-pmap-c)#?
> QoS policy-map class configuration commands:
> bandwidth Bandwidth
> compression Activate Compression
> drop Drop all packets
> exit Exit from QoS class action configuration mode
> netflow-sampler NetFlow action
> no Negate or set default values of a command
> police Police
> priority Strict Scheduling Priority for this Class
> queue-limit Queue Max Threshold for Tail Drop
> random-detect Enable Random Early Detection as drop policy
> service-policy Configure Flow Next
> set Set QoS values
> shape Traffic Shaping
>
> Rack3R1(config-pmap-c)#
>
>
> Regards
> Tommy
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3