From: Eric.Stuhl@ferguson.com
Date: Thu Mar 30 2006 - 11:30:42 GMT-3
You may have answered your own question. I would suggest looking at the
list of options within the class. You could also search on LLQ, which
MQC with a strict priority queue.
Eric Stuhl
CCNP, CCDP, CCSE-NG
Ferguson Enterprises
eric.stuhl@ferguson.com
(757)-969-4146
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
armonico
Sent: Thursday, March 30, 2006 9:21 AM
To: ccielab@groupstudy.com
Subject: Priority queuing with MQC
Hi all
Is it possible to configure priority queuing with MQC?
I want to map packet marked with immediate(precedence) to priority high
queue.
I could not find the way to configure by using "priority-list".
Rack3R1(config)#class-map PRECEDENCE
Rack3R1(config-cmap)#match ip precedence immediate
Rack3R1(config)#policy-map PRIORITY
Rack3R1(config-pmap)#class PRECEDENCE
Rack3R1(config-pmap-c)#?
QoS policy-map class configuration commands:
bandwidth Bandwidth
compression Activate Compression
drop Drop all packets
exit Exit from QoS class action configuration mode
netflow-sampler NetFlow action
no Negate or set default values of a command
police Police
priority Strict Scheduling Priority for this Class
queue-limit Queue Max Threshold for Tail Drop
random-detect Enable Random Early Detection as drop policy
service-policy Configure Flow Next
set Set QoS values
shape Traffic Shaping
Rack3R1(config-pmap-c)#
Regards
Tommy
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3