From: Marius Venter (marius@aict.co.za)
Date: Thu Mar 30 2006 - 04:48:08 GMT-3
Hi Victor
Please let me know if this sequence works as I have tried this sequence and
it does not work.
As far as I know there is no way of interrupting this function
I did this in my lab just now and you will see in the output that I enabled
ip lookup and then tested.
This would be a result that you would expect but the key difference is that
it took less that a second to try and resolve the name where previously it
would take several seconds. (Not enough time to interrupt)
This action negates the use of no ip domain-lookup command as it all happens
really fast.
You will see that I also included my version for the sake of completeness.
Hope this helps
Marius Venter
Rack1R5#
Rack1R5#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Rack1R5(config)#ip domain-lookup
Rack1R5#abc
Translating "abc"...domain server (255.255.255.255)
(255.255.255.255)
Translating "abc"...domain server (255.255.255.255)
Translating "abc"...domain server (255.255.255.255)
% Unknown command or computer name, or unable to find computer address
Rack1R5#
Rack1R5#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-JS-M), Version 12.3(17a), RELEASE SOFTWARE
(fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Mon 12-Dec-05 16:29 by evmiller
Image text-base: 0x60008B00, data-base: 0x61F08000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
ROM: 3600 Software (C3640-JS-M), Version 12.3(17a), RELEASE SOFTWARE (fc2)
Rack1R5 uptime is 2 days, 2 hours, 55 minutes
System returned to ROM by reload
System image file is "flash:c3640-js-mz.123-17a.bin"
cisco 3640 (R4700) processor (revision 0x00) with 118784K/12288K bytes of
memory.
Processor board ID 25129561
R4700 CPU at 100MHz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 FastEthernet/IEEE 802.3 interface(s)
4 Low-speed serial(sync/async) network interface(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Alexei Monastyrnyi
Sent: Thursday, March 30, 2006 9:34 AM
To: Victor Cappuccio
Cc: CCIE LAB
Subject: Re: key sequence
ctrl+shift+6 x
on 30/03/2006 02:51 Victor Cappuccio wrote:
> Hello List, please I wish to know, if there any key sequence to abort
> out the name resolution in the Router CLI, lets say I do not what to
> no ip domain-lookup
>
> Rack1R1# Rack1R1#show ip pim rp co
> Translating "co"...domain server (255.255.255.255)
> ^
> % Invalid input detected at '^' marker.
>
> Rack1R1#x^Z
> % Ambiguous command: "x"
> Rack1R1#show run | be line con
> line con 0
> logging synchronous
> transport preferred none
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3